Detect
Alarm sensors, perimeter beams, panic devices or other approved inputs identify an event.
HIGH-DENSITY SECURITY FOG
The fog that stops the intruder.
Fog Bandit removes the visibility an intruder needs to locate and remove valuables. Active protection for high-risk commercial and residential spaces across Sydney.
SECURITY FOG SYDNEY
Fog Bandit Systems • Installed & Supported by Amaro Electronics
Active Intrusion Protection • Sydney
Security Fog Sydney Fog Bandit Systems
Stop the Opportunity, Not Just the Alarm.
Fog Bandit adds an active physical response layer when alarms and CCTV alone are not enough. Once approved activation conditions are met, dense security fog can rapidly restrict usable visibility and reduce an intruder's opportunity to locate or remove valuable assets.
The first question is simple: how many cubic metres need protection? Calculate the approximate room volume, understand the available options, then let Security Fog Sydney and Amaro Electronics prepare the recommendation for your site.
Professionally Installed
Site-Specific System Design
Alarm Integration Options
Ongoing Service Support
See It in Action
Security Fog Is Better Seen Than Explained
Watch the seconds as dense security fog rapidly changes the protected environment. The speed of intervention is one of the reasons security fog is different from a system that only records or reports an intrusion.
Security fog is not intended to replace alarms, CCTV or monitoring. It becomes the active internal response layer when the approved system design calls for intervention.
Understand the Complete System
Detect. Verify. Intervene. Supervise.
Fog Bandit is one active layer within a professionally designed security response.
Verify
CCTV, sequential alarm logic or an authorised person can form part of the confirmation strategy.
Intervene
Fog Bandit deploys dense security fog once the programmed activation conditions are satisfied.
Supervise
Compatible systems can report selected power, battery, tamper, cartridge or technical conditions.
Start With Cubic Metres
How Big Is the Area You Want to Protect?
Security fog is designed around room volume, not floor area alone. Measure the approximate length, width and ceiling height of the protected space.
Length × Width × Height = m³
Example: 6 m × 6 m × 3 m = 108 m³.
The calculator is a preliminary guide.
Room layout, airflow, open doorways, ceiling design,
asset locations and required fog trajectory are confirmed during professional assessment.
0 m³
Enter the three measurements to calculate the approximate protected volume.
Got your cubic metres? That is the main measurement we need.
Use your calculated volume in our enquiry form and our security fog team can prepare a preliminary Fog Bandit recommendation for your site.
Request My Security Fog Recommendation
Two Main Fog Bandit Solutions
Start With the Volume. We Help Select the System.
The public page keeps the choice simple. Your cubic metres give us the starting point; the final model, mounting and control configuration are confirmed for the site.
Fog Bandit 320
A compact high-speed security fog platform for small-to-medium protected areas and high-value rooms.
Up to approx. 200 m³
A useful initial volume guide only. Final design remains site-specific.
- Compact generator with multiple mounting possibilities
- Two-cartridge internal arrangement
- Compatible alarm and authorised activation integration
- Concealed and aesthetic installation options
- Optional pulsed LED / Flash Fog configurations
Fog Bandit 240
A programmable multi-activation platform for larger areas, more complex room layouts or applications requiring greater output flexibility.
For larger or more demanding protected volumes
Output, nozzle and mounting configuration are selected around the actual site.
- Programmable fog output according to the protected area
- HY-3 multi-activation cartridge architecture
- Local Control Box for system and cartridge-status information
- Multiple nozzle patterns and mounting configurations
- Suitable for larger or more complex protected spaces
Already know your cubic metres?
Send us the volume, premises type and existing alarm details. We will review the application and respond to your enquiry.
Fog Bandit 320 — Visual Overview
See the Generator, Cartridge Layout and Installation Options
A quick visual introduction to the 320 helps explain the product without turning the page into a technical manual.
Educational visual reference.
Product appearance, accessories, colours, component layout and final installation may vary by model, supply specification and site requirements.
Fog Bandit 320 — How the Layers Work Together
Detection. Control. Active Fog Response. Monitoring.
The alarm system and Fog Bandit remain separate systems, but they can be professionally integrated as part of one security response.
Educational visual reference.
This diagram is intended to explain the system concept. Actual devices, wiring, component positions and final integration may differ according to the installed security platform and site design.
Already have an alarm?
Tell us the alarm brand or model when you enquire so integration can be assessed as part of the recommendation.
Fog Bandit 240 — Visual Overview
See How the 240 Fits Into an Integrated Security Response
This visual introduces the detector, controls, integration enclosure, 240 generator and Standard Tri Nozzle fog spread.
Educational visual reference.
The diagram illustrates a typical system concept only. Actual equipment, accessories, wiring, mounting and final configuration may vary.
Fog Bandit 240 — Nozzle Options
Different Rooms Need Different Fog Direction
Nozzle choice helps direct the fog according to room shape, mounting height and the area that needs protection.
Educational visual reference.
Fog trajectories are illustrative. Final nozzle, mounting position and projection path are selected after assessment of the actual protected space.
Additional visual reference.
This image provides a supplementary overview of Fog Bandit 240 system configuration and installation concepts. Final equipment and layout are confirmed for each site.
Finish options:
anthracite / black is the standard finish. White and other aesthetic finishes may be available by special order and are confirmed before quotation.
Cartridges and Long-Term Readiness
Know What Is Serviced Without Needing to Learn Every Part Number
Security fog systems are designed to remain ready for long periods, so cartridges, batteries and periodic testing form part of ongoing maintenance.
320 Cartridge System
The 320 uses sealed cartridge positions inside the compact generator. Operational cartridges are replaced after use as required.
240 HY-3 Cartridge System
The 240 uses a multi-activation HY-3 cartridge architecture designed around programmable fog output.
Periodic Maintenance
System servicing should include battery condition, cartridge condition, alarm integration, controls and operational testing.
Critical sites may also require UPS or additional backed-up power for alarm, communications, CCTV, networking or associated infrastructure. This is assessed separately for the site.
Optional Visual Deterrence
Fog + High-Intensity Pulsed LED
Selected configurations can add a pulsed LED / camera-flash effect to the active fog response. It is an optional layer rather than a requirement for every installation.
Designed Around the Site
One System Does Not Fit Every Environment
Fog output, flash, alarm logic, panic activation, nozzle type and mounting position are selected around the actual operating environment.
Final equipment selection and detailed recommendation are provided after the enquiry and site information are reviewed.
Purpose-Designed Security Fog
Dense Security Fog Without Combustion Smoke
Fog Bandit security fog is generated for security applications rather than by combustion. Manufacturer information describes the fog for use in protected environments when correctly specified and used as intended.
The objective is rapid visibility restriction without using fire smoke as the deterrent mechanism.
Professional System Design
Every Installation Is Assessed Before Commissioning
Occupancy, ventilation, smoke detection, fire systems, emergency procedures, ceiling height, room layout and asset location must be considered before installation.
Security fog is an intrusion-protection system.
It does not replace, disable or override legally required life-safety or fire-protection systems.
Security Fog Applications Across Sydney
Protection for Valuable Assets and High-Risk Areas
Jewellery & Watch Stores
Active protection for high-value stock during selected burglary or authorised robbery-response scenarios.
Pharmacies
Protect high-value and controlled inventory in selected areas.
Electronics Retailers
Restrict usable visibility around portable, high-value merchandise.
Retail & Convenience
Add an active response layer beyond alarm notification alone.
Warehouses & Storage
Programmable output or multiple devices can be considered for larger or divided spaces.
Selected Residential Areas
Protect nominated rooms after professional assessment of occupancy and system design.
Think Fog Bandit may suit your site?
You do not need to select the equipment yourself. Send us your cubic metres and the type of premises.
Professional Installation and Support in Sydney
Designed, Installed and Maintained as a Security System
Fog Bandit is professional security equipment installed as part of a site-specific security design. Final equipment, integration, commissioning, maintenance requirements and applicable warranty information are confirmed with the project recommendation and quotation.
Professional Site Assessment
Alarm Integration Review
Commissioning & Testing
Ongoing Service Support
Frequently Asked Questions
Understand the Basics. Then Let Us Review Your Site.
How do I calculate the area for a Fog Bandit system?
Measure the approximate room length, width and ceiling height in metres.
Multiply Length × Width × Height to obtain the approximate room volume in cubic metres (m³).
Do I need the 320 or the 240?
The 320 is the compact option for small-to-medium protected areas, while the 240 provides greater flexibility for larger or more complex spaces.
Your cubic metres are the starting point; final selection depends on the site.
Can Fog Bandit integrate with my existing alarm?
Compatible alarm integration can form part of the professional system design.
The existing alarm platform, activation logic and required interfaces are reviewed for the site.
Can Fog Bandit be installed discreetly?
Depending on the model and site design, visible, ceiling, horizontal and concealed installation approaches may be available.
What maintenance should I expect?
Periodic maintenance should include cartridge condition, battery condition, system controls, alarm integration and operational testing.
Why is a site assessment still required if I know my cubic metres?
Cubic metres are the starting point. Final design also depends on room shape, airflow, ceiling height, entry points, asset locations, nozzle direction and system integration.
How do I receive a preliminary recommendation?
Use the enquiry form and include your approximate cubic metres, premises type and whether an alarm system is already installed.
Security Fog Sydney, supported by Amaro Electronics, can then review the request and respond to your application.
Educational illustration notice:
Images and composite diagrams on this page are provided for educational and explanatory purposes.
Product appearance, component layout, accessories, mounting arrangements and final installation configuration may vary according to model, supply specification and individual site requirements.
Final system design is confirmed during professional assessment.
Know Your Volume. Tell Us the Risk. We Will Design the Response.
Ready for a Security Fog Recommendation?
Tell us your approximate cubic metres, the type of premises and whether an alarm is already installed. We will review the application and respond to your enquiry.